CERAMIC SHAMPOO - With SiO2 technology to protect your car and give protection | ManiacLine

CERAMIC SHAMPOO by ManiacLine: with SiO2 technology to protect your car and give protection. 00:00 Intro and features 00:10 What CERAMIC SHAMPOO by ManiacLine removes 00:21 How to prewash with FOAM GUN PREWASH by ManiacLine 00:32 How to use CERAMIC SHAMPOO by ManiacLine with the double bucket 01:20 Tips 1 - Hydrophobic Effect Booster with Pad 01:35 Tips 2 - Hydrophobic Effect Booster with Foam Gun 01:59 Final result 02:14 How to dry the bodywork with Mafra SUPERDRYER 02:26 Features and Recommendations FEATURES - It gives the treated surface a self-cleaning hydrophobic capacity that allows you to keep the car cleaner for a long time - Formula 3 in 1: Washes, Seals and Protects for 90 days in a single operation - Contains super hydrophobic SiO2 ceramic polymers that create a chemical resistant shield - Leaves the surface silky giving an extreme shine like a wax in a jar - Creates a balanced and lubricated foam that easily removes dirt avoiding the creation of micro-scratches or swirls - When used as a maintenance product, it will increase the protective properties of the previously applied wax, sealant or ceramic coating HOW TO USE HAND WASH WITH BUCKET Pour 4 caps of CERAMIC SHAMPOO by ManiacLine into a bucket of water and use it as a normal shampoo. Proceed by washing one panel at a time, always in the shade, with the vehicle wet and starting from the bottom up, as opposed to using a traditional shampoo. This is because CERAMIC SHAMPOO by ManiacLine being a polymer, if you start from the top, the pouring will risk leaving an uneven coverage of the surface, instead starting from the bottom you will be able to guarantee a uniform and effective application and coverage. You can use a glove or a sponge, whichever you prefer, as long as they are in perfectly clean soft microfiber. We advise you to proceed by STEP, perhaps washing half the vehicle at a time: you will avoid letting the product dry on the bodywork even on the hottest days. Complete the wash on the whole car and proceed with rinsing and drying with the super absorbent Super Dryer microfiber cloth: HOW TO INCREASE THE HYDROPHOBIC AND PROTECTIVE PERFORMANCE OF CERAMIC SHAMPOO FIRST METHOD The first method is with a glove or a pad always in microfiber, the same one you used for washing. Take a graduated bottle and dilute the product in the proportion 1: 5 (1 part of product and 5 of water). Spray the solution obtained on the same washing pad or glove and distribute it all over the car without neglecting any point, exactly as you did during the washing phase. SECOND METHOD The second method is with the Foam Gun technique. Take a graduated bottle and dilute the product in the proportion 1: 3 (1 part of product 3 parts of water). It delivers the solution obtained with the foaming technique, on the whole car from bottom to top. Wait for at least 1 minute and rinse with high pressure starting from top to bottom. No matter what technique you used, in both cases the hydrophobic effect will now be even more intense and the bodywork sealed and protected for 90 days. The hydrophobic (beading) and protective effect will already be visible in the rinsing phase. In fact, you will see the drops of water that settle on the surface with a perfectly circular shape. In addition, the drops of water will engulf the particles of surface dirt which, thanks to the protection offered by CERAMIC SHAMPOO by ManiacLine, do not adhere strongly to the surface. Gliding quickly, they will produce a self-cleaning effect that will facilitate the next maintenance wash that you can carry out, with NEUTRAL FOAM SHAMPOO, after a couple of weeks, based on the kilometers traveled. NEUTRAL FOAM SHAMPOO: RECOMMENDATIONS Make sure the vehicle surface is not hot and the car is in the shade avoiding direct sun. Before using CERAMIC SHAMPOO by ManiacLine, as always before washing with manual shampoo, we carry out an accurate pre-wash with “FOAM GUN PREWASH“ ​​to remove the coarse dirt present on the surface and facilitate the subsequent manual washing phase. To increase the performance of the product and the duration of the protection, we recommend decontaminating the car with our IRON REMOVER with clay bar, before applying CERAMIC SHAMPOO by ManiacLine, thus allowing greater adhesion of SiO2 ceramic polymers to the bodywork. For the use of CERAMIC SHAMPOO by ManiacLine we suggest using the two-bucket washing method (one with the shampoo / water solution and the other with clean water only) in combination with a microfiber glove. Using the grate in the bucket helps remove dirt and impurities from the glove or sponge by making it settle to the bottom of the bucket. Web: - Facebook: - Instagram: