Bracket-Warehouse RM-B Recessed Rackmounted Bracket for Behringer XAIR

Available now! For use with the following mixers; Behringer X Air XR18 Behringer X Air XR16 Midas MR18 Midas MR16 Other Available Versions; Behringer X AIR XR12 Midas MR12 Included; - 2 x Brackets - 8 x Stainless Steel Hex Bolts - Allen Key for bolts - Online installation guidance – videos and documentation The RM B18 is an innovative bracket offering variable mixer depth, permanent connectivity of all ins and outs and a superior affixing design using 8 hex bolts. Designed and laser cut from stainless steel in the UK factory the bracket is designed to provide the highest level of protection for your Behringer or Midas rack mounted mixer. The unique design affixes to the mixers side panels at both the front and back, using 4 bolts per side (supplied with the bracket), instead of the standard 2 screws. The complimentary Allen key significantly reduces the risk of stripping the bolt head and the cylindrical bold design reduces the number of times the in/outs are connected & disconnected prolonging the life of the mixer. The bracket offers 3 different recess depths allowing you to position the mixer to your specific requirements. Additionally, when attached at position 2 & 3 you can route all of the XLRs, Jacks, Cat 5 and Midi cables through the sides of the bracket allowing you to leave the entire unit plugged in during transit and producing a tidy cable setup. The permanent connectivity is both a considerable time saver during setup/set-down and significantly reduces the number of times the in/outs are connected & disconnected during the mixers lifetime. Product Overview; 1 - Recess Your Mixer Offering 3 recess depths the RM B18 provides a solution for a broad range of mixer applications, from gig-ready setups to permanent installations. 2 – Leave Your Cables Plugged In Speed up your setup and set-down times with permanently installed XLRs, Jacks, Ultranet, MIDI & Ethernet using the brackets integrated cable routing for a neat installation. 3 – Solid and Secure Bracket to Mixer Mounting Featuring twice the number of standard fixings the RM B18’s superior 8 bolt fixing system ensures the bracket remains securely attached to the mixer during operation and in transit. 4 – Rated Hex Bolts We provide 8 hex bolts to attach the RM B18 to your XAir. Using the included Allen key you are less likely to strip the bolt heads and if you do, you can easily remove the bolts with a pair of standard pliers. 5 – Extend The Life Of Your Mixer The RM B18 reduces wear and tear on your mixer’s connections by giving you the ability to leave them plugged in thus reducing the number of times you will connect and disconnect cables to your mixer. 6 – Protect Your Cabling As the mixer is held further back in the rack when your XAir rack is placed on the floor your cables are far less likely to be accidentally kicked or brushed during operation, particularly the USB record stick (X12 version).