Mac classic LED lighting print on Ender 3

STL- Today’s Macintosh computers made by Apple in the past have such a great design that they are very cool even if they are used in other products. Previously, I also made an iMac light, and the design was also cool, and there were good responses from customers. So this time, we designed a new lighting using Macintosh Classic. Where the floppy disk is inserted, the SD card can be inserted. The front part can be easily opened to replace the screen or insert and remove the LED candle light. The Macintosh startup screen was drawn on the inside of the screen so that it could be seen through when the LED candle light was inserted. I also put a screen without any pictures, so you can use it if you want to create your own lithophane. Please refer to the video for detailed usage. This design has a white body, so light can shine on areas other than the screen. To prevent this, you can increase the infill and wall or block it with black tape on the inside of the body. Please look forward to the next design using Apple’s design. Largest part in printing, size = X 60mm, Y 58mm, Z 75mm, After full assembly size= X 60mm, Y 60mm, Z 75mm Total Build Time : 15h 56m / Plastic Weight : 70g