Learn How to Install the UV Front Cover in 5 Minutes | Vertical LFC | Esco Scientific

Disclaimer: The film in the cabinet is removed in an actual setup. Esco laminar flow cabinets with sliding sash models are also available. Watch this to learn how to install the UV front cover of a VERTICAL laminar flow cabinet in just 5 minutes! To enable this feature, make sure that the front cover is placed properly. The UV front cover is only available for Esco LFC with fixed sash models. Step 1. Install the Z-Bar. Remove screws located at the front edge of the worktop using a screwdriver. Align the Z-Bar and screw it tightly to hold it in place. Step 2. Properly place the UV front cover. Hold the handles and slide the top of the front cover into the air guide first and then into the Z-Bar provision. Avoid hitting any part of the cabinet to prevent scratches. Step 3. Attach the magnet to the UV front cover. The magnet activates the mainboard sensor. Once the magnet is attached, it will contact the magnetic switch behind the front cover, activatin