Messerschmitt Bf 109E 4 print on ender

STL- This design is the second series of WWII aircraft. It is relatively small on the same scale and has thin wings, so rather than making many movable parts, I tried a lot of color separation. And I tried to express the engine inside. The movable parts are the flaps of the main wing and the propeller. The vertical tail fins do not move, they are only color-separation, so please attach them with glue. ※ Precautions 1. After printing, the custom support must be removed first. 2. Cross parts must be printed in unconditionally. The cross parts are so thin that the shape cannot be accurately represented unless printed in layers. Additionally, it is recommended to set (Simplify)Outline overlap, (Cura)Skin Overlap Percentage, and (PrusaSlicer)Overlap (Infill/perimeters overlap) to 10~20% in the slice settings. 3. The cross of the wing and fuselage are slightly different in thickness and size, so you need to match them before attaching them. We plan to make a display stand later. Please look forward to it! 1 : 48 Scale Largest part in printing, size = X 63mm, Y 103mm, Z 104mm, After full assembly size= X 208mm, Y 188mm, Z 78mm Total Build time : 22h 20m / Plastic weight : 65g