Explosion Proof Fire Alarm Station - Pull Ring - Class I Div 1 & 2 - Class 2 Div 1 & 2- 120 VAC

Explosion Proof Fire Alarm Station - Pull Ring - Class I Div 1 & 2 - Class 2 Div 1 & 2- 120 VAC The Larson Electronics EXP-FAS-PR-1XC explosion proof fire alarm station is suitable for hazardous locations that requires emergency activation of fire alarms or signal circuits. This unit operates on 120 VAC @ 60 Hz and uses a simple, two-step pull ring mechanism for seamless activation. It carries the following explosion proof ratings: Class I, II, III, Division 1 & 2. The hazardous location fire alarm station features (1) NO/NC contact blocks, a copper-free aluminum alloy enclosure and bilingual nameplates for compliance. This device may be used in chemical plants, gas stations, grain refineries, storage areas and other applicable hazardous locations under the classification of this unit. Features: The EXP-FAS-PR-1XC explosion proof fire alarm station offers manual emergency control in hazardous locations. The enclosure on the 120 VAC @ 60 Hz device is made of copper-free aluminum alloy, while a textured powder epoxy paint finish (red) is applied to the box and cover for high visibility. On the front of the unit, bilingual nameplates can be found for easy operation (in compliance with safety requirements). When activating the alarm station, operators must lift the front cover and pull down the ring. This two-step process is designed to prevent unintentional activation. The conduit openings in the fire alarm station are 3/4“ NPT feed-through. During installation, individuals may use #12 AWG through #24 AWG solid or stranded wiring ranges. The internal ground screw on this unit is standard. When maintaining this device, it must first be disconnected from the supplying circuit before the cover is removed. Lubricant may be applied occasionally to prevent corrosion. Contact Block Ratings: This unit features (1) NO/NC contact blocks and the following contact block ratings: 120 VAC (60 A make, 7200 VA, 6 A break, 720 VA, 10 A continuous carry); 240 VAC (30 A make, 7200 VA, 3 A break, 720 VA 10 A continuous carry); 480 VAC (15 A make, 7200 VA, 1.5 A break, 720 VA, 10 A continuous carry); 600 VAC (12 A make, 7200 VA, 1.2 A break, 720 VA, 10 A continuous carry); 125 VDC (1.1 A make/break, 5 A continuous carry); 250 VDC ( make/break, 5 A continuous carry) and 600 VDC (0.2 make/break, 5 A continuous carry). Applications: Petroleum refineries, chemical and petrochemical plants, paint spray booths, gas stations, grain refineries, textile mills, fiber processing plants, woodworking facilities, storage areas, and other processing facilities where hazardous substances are handled and stored. At Larson Electronics, we do more than meet your lighting needs. We also provide replacement, retrofit, and upgrade parts as well as industrial grade power accessories. Our craftsmen can custom build any lighting system and/or accessories to fit the unique demands of your operation. A commitment to honesty, quality, and dependability has made Larson Electronics a leader in the lighting and electronics business since 1973. Contact us today at 1-800-240-2508 or message sales@ for more information about our custom options tailored to meet your specific industry needs.